kicad-studio

概述

KiCad Studio是一款全面的VS Code扩展，将您的工作环境转变为交互式KiCad工作空间。它提供原理图/PCB查看器、DRC/ERC诊断、BOM/网表检查和制造导出功能。该扩展通过kicad-mcp-pro提供强大的MCP集成，支持AI辅助设计工作流、质量门和设计意图表单。支持Claude、OpenAI和GitHub Copilot等多种AI提供商，弥合了传统PCB设计与现代AI辅助之间的鸿沟。

试试问 AI

装完之后，这里有 5 个你可以让 AI 做的事：

• detect_kicad_cli

  Detects the local KiCad CLI installation

  试试:Detect my KiCad CLI试试:Where is KiCad CLI installed?
• run_drc

  Runs Design Rule Check on a KiCad PCB project

  试试:Run DRC on my PCB试试:Check design rules for my board
• run_erc

  Runs Electrical Rule Check on a KiCad schematic project

  试试:Run ERC on my schematic试试:Check electrical rules for my design
• export_3d_pdf

  Exports a 3D PDF from a KiCad PCB project

  试试:Export 3D PDF of my board试试:Create a 3D PDF visualization
• setup_mcp_integration

  Sets up MCP integration with kicad-mcp-pro

  试试:Setup MCP integration试试:Connect to kicad-mcp-pro
• install_kicad_mcp_pro

  Installs kicad-mcp-pro dependency

  试试:Install kicad-mcp-pro试试:Get MCP tools for KiCad
• pick_mcp_profile

  Selects an MCP profile tailored for specific workflows

  试试:Pick an MCP profile for manufacturing试试:Show me available MCP profiles
• run_all_quality_gates

  Runs all quality gates through kicad-mcp-pro

  试试:Run all quality gates试试:Check my design quality
• manufacturing_release_wizard

  Guides through manufacturing release workflow

  试试:Prepare manufacturing release试试:Export my board for fabrication
• open_mcp_log

  Opens the MCP request/response log for debugging

  试试:Show me the MCP log试试:Debug my MCP connection
• open_design_intent

  Opens the design intent form panel

  试试:Edit design intent试试:Set project requirements
• manage_chat_provider

  Manages AI chat provider configuration

  试试:Configure AI chat provider试试:Set up Claude for KiCad

说明：Tools inferred from 'Key Commands' section in README. No explicit MCP tool documentation found, but these appear to be the MCP-exposed commands based on the integration description.

可对比工具

安装

code --install-extension oaslananka.kicadstudio

{
  "mcpServers": {
    "kicad-mcp-pro": {
      "command": "uvx",
      "args": ["kicad-mcp-pro"]
    }
  }
}

FAQ

支持哪些KiCad版本？

KiCad Studio支持KiCad 9和10。KiCad 10提供完整的变体、调整和3D PDF导出支持，而KiCad 9只有有限的项目后备支持。

如何设置MCP集成？

运行'KiCad: Install kicad-mcp-pro'，然后运行'KiCad: Setup MCP Integration'。扩展将自动从uvx、pip、pipx或全局可执行文件中检测kicad-mcp-pro。

kicad-studio 对比