spicebridge

概述

SPICEBridge 是一个专门的 MCP 服务器，将自然语言处理与电子电路仿真相结合。它提供了 28 个全面的工具，涵盖整个电路设计工作流程，从模板加载和元件计算到仿真、测量和规格验证。服务器支持交流扫描、瞬态分析和直流工作点仿真，以及蒙特卡洛和最坏情况分析功能。除了仿真外，它还提供 KiCad 导出、原理图生成和云设置向导等功能，便于部署。

试试问 AI

装完之后，这里有 5 个你可以让 AI 做的事：

• create_circuit

  Store a SPICE netlist, returns a circuit ID

  试试:Create a new circuit with this netlist试试:Save this SPICE circuit design
• load_template

  Load a template with parameter substitution

  试试:Load a low-pass filter template with 3dB frequency of 1kHz试试:Use the op-amp template with gain of 10
• run_ac_analysis

  AC frequency sweep

  试试:Run AC analysis from 1Hz to 1MHz试试:Perform frequency response simulation
• run_transient

  Transient (time-domain) analysis

  试试:Simulate the circuit over 10ms试试:Run transient analysis with 1us step size
• measure_bandwidth

  Find -3 dB bandwidth from AC results

  试试:Measure the -3dB bandwidth of this circuit试试:Find the cutoff frequency
• measure_gain

  Measure gain at a specific frequency

  试试:Measure gain at 1kHz试试:Find the voltage gain at mid-band frequency
• compare_specs

  Check measurements against target specs

  试试:Check if bandwidth meets 10kHz spec with 5% tolerance试试:Verify gain is at least 20dB
• draw_schematic

  Generate a schematic diagram (PNG/SVG)

  试试:Draw the schematic of this circuit试试:Generate a PNG schematic diagram
• export_kicad

  Export as KiCad 8 schematic (.kicad_sch)

  试试:Export this circuit to KiCad format试试:Create a KiCad schematic file
• connect_stages

  Compose multiple stages into a single circuit

  试试:Connect these two amplifier stages试试:Combine the preamp and power amp circuits
• run_monte_carlo

  Monte Carlo analysis under component tolerances

  试试:Run Monte Carlo analysis with 5% resistor tolerance试试:Simulate 100 variations with component tolerances
• create_model

  Generate a SPICE .lib model from datasheet parameters

  试试:Create a model for this transistor from datasheet试试:Generate a SPICE model for an op-amp

可对比工具

安装

pip install spicebridge

{
  "mcpServers": {
    "spicebridge": {
      "command": "spicebridge"
    }
  }
}

spicebridge setup-cloud  # 交互式部署
spicebridge setup-cloud --quick  # 快速临时隧道

FAQ

支持哪些 SPICE 分析类型？

SPICEBridge 支持 AC 扫描分析、瞬态分析和直流工作点分析。

我可以将设计导出到 KiCad 吗？

是的，SPICEBridge 包含一个 `export_kicad` 工具，可将设计导出为 KiCad 8 原理图文件 (.kicad_sch)。

Hacker News 讨论

开发者社区最近的相关讨论。

• Show HN: SPICEBridge – MCP server for AI circuit design via ngspice▲ 1
  帖子 by clanker-lover · 2026-02-11

spicebridge 对比